DeWalt DXDP400161 Instruction Manual page 8

English
V-RING TOOL ATTACHMENT
25 mm Polyester Webbing
Webbing Loop
D-Ring
MAX
3
3 5
DXDP710200
LBS
15,88 kg/
25 mm Polyester Webbing
Webbing Loop
D-Ring
Single Wing
MAX
3
3 5
DXDP710201
LBS
15,88 kg/
Webbing Loop 25 mm Polyester Webbing
D-Ring
Double Wing
MAX
3
3 5
DXDP710221
15,88 kg/ LBS
Webbing Loop 25 mm Polyester Webbing
D-Ring
Double Wing
MAX
8
8 0
DXDP710222
LBS
36,29 kg/
12
Steps to use v-ring attachment
Untangle the tool
attachment and pass
the loop at the other end
through the desired tool.
Now clinch the loop over
the tool and tightly wrap
the two wings of the tool
attachment over the tool
for strong hold grip on
the tool
MAX
3
3 5
15,88 kg LBS
Tightly wrap the tool tape
(DXDP810100) around the
anchor knot for tight grip
and strong stable fix of the
knot on the tool.
WARNING:
Anchor Attachments, the user must ensure that
Stretch the webbing of
the Maximum lanyard length identified on the
the tool attachment for attachments is compatible with the identified
making a tight knot on
lanyard length indicated on the tool lanyard
the tool.
label. Failure in doing so may not give optimum
utilization of the connection made.
WARNING:
accessories, basic precautions should always be
followed, including the following:
a ) The user must weigh the tool or tools to be tethered
to ensure they do not exceed the maximum safe
working capacity of the tool lanyard or any part of
your tethering system. User should also refer to the
label or user manual for information on maximum
capacity information
b ) Always inspect tool lanyard and all parts of the
tethering system prior to, and after each use (refer to
inspection steps).
c ) Use extra caution around moving machinery or
parts, electrical hazards, chemical hazards or other
Now the V-Ring tool
attachment is ready to apparent hazards.
use.
d ) Always wear appropriate personal protective
equipment when installing or using tethering systems.
e ) Always ensure the carabiners are closed and locked
properly.
f ) Always ensure the hook & loop closure fasten
properly.
English
When using Retrofit Tool or
When using tool lanyard and
DOs
13