Axis Q1615 Mk III User Manual page 7

Hide thumbs Also See for Q1615 Mk III:
Table of Contents

Advertisement

AXIS Q1615 Mk III Network Camera
Configure your device
2. Click
3. Adjust the camera mechanically until the position of the reference area or the object is aligned with the level grid.
Reduce image processing time with low latency mode
You can optimize the image processing time of your live stream by turning on low latency mode. The latency in your live stream is
reduced to a minimum.
1. Go to System > Plain config.
2. Select ImageSource from the drop-down list.
3. Go to ImageSource/I0/Sensor > Low latency mode and select On.
4. Click Save.
Select exposure mode
To improve image quality for specific surveillance scenes, use exposure modes. Exposure modes lets you control aperture, shutter
speed, and gain. Go to Video > Image > Exposure and select between the following exposure modes:
For most use cases, select Automatic exposure.
For environments with certain artificial lighting, for example fluorescent lighting, select Flicker-free.
Select the same frequency as the power line frequency.
For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and
sun during daytime, select Flicker-reduced.
Select the same frequency as the power line frequency.
To lock the current exposure settings, select Hold current.
Benefit from IR light in low-light conditions by using night mode
Your camera uses visible light to deliver color images during the day. But as the visible light diminishes, color images become less
bright and clear. If you switch to night mode when this happens, the camera uses both visible and near-infrared light to deliver bright
and detailed black-and-white images instead. You can set the camera to switch to night mode automatically.
1. Go to Video > Image > Day-night mode, and make sure that the IR-cut filter is set to Auto.
Reduce noise in low-light conditions
To reduce noise in low-light conditions, you can adjust one or more of the following settings:
Adjust the trade-off between noise and motion blur. Go to Video > Image > Exposure and move the Blur-noise trade-off
slider toward Low noise.
Set the exposure mode to automatic.
Note
A high max shutter value can result in motion blur.
To slow down the shutter speed, set max shutter to the highest possible value.
Note
When you reduce the max gain, the image can become darker.
to show the level grid.
7

Advertisement

Table of Contents
loading

Table of Contents