Advertisement
ProMARK X
keyed in when WATER is displayed,
WATER is now assigned to 03 and POLE
no longer has an assignment.
If you wish to edit an attribute, press the
down arrow to move to the EDIT at-
tribute screen.
delete one character at a time (like a
backspace key). Delete as many charac-
ters as desired and then re-enter charac-
ters with the alphanumeric keys. Press
ENTER when finished to return to the
Attribute screen.
If you wish to add a new attribute to the
attribute file, press the CLEAR key from
the Attribute screen to move to the
INPUT NEW ATTRIBUTE screen.
Type in the new attribute (up to 72
characters) with the alphanumeric keys.
Press ENTER when entry is completed
to return to the Attribute screen with
the newly entered attribute displayed.
Now key in a number assignment from
1 - 99 and press ENTER (if you wish to
actively use this attribute). Remember
that if the number you key in is already
assigned, the new attribute will get the
number assignment and the old at-
tribute number assignment will be de-
leted. Press ENTER from the Attribute
screen to return to the Attribute file
screen. You may also continue to add
new attributes by the preceding steps,
use the RIGHT ARROW to toggle
through other attributes, key in new key
number assignments, or edit other at-
tributes.
The CLEAR key will
Attributes
EDIT ATTR
WATER_
INPUT NEW ATTR:
_
PRESS ENTER
INPUT NEW ATTR:
BEDROCK_
PRESS ENTER
ATTRIBUTE:
BEDROCK
04
~!
6-3
Advertisement
Chapters
