Advertisement
SETUP
Use the RIGHT ARROW to
SELECT LOG, COMM, OFF,
NMEA, or RTCM. Press EN-
TER.
Next, use the RIGHT ARROW
to select the baud rate for port
1. Select 9600, 19.2, 38.4,
115, 1200, 2400, or 4800.
After you have set the ports,
press the RIGHT ARROW to
select DONE.
You can override these port settings in each individual func-
SETUP 8 — Choosing a Coordinate System. The ProMARK X can display
positions in ten coordinate systems (Lat/Lon, MGRS UTM, UTM, British Grid,
Irish Grid, UPS, MGRS UPS, West Malaysian, Indonesia South, and Indonesia
Equatorial), plus any user-entered grid reference system. You may enter and
store up to five user-entered grids or use the COMM module of the PPSW
to upload grids.
Once selected in SETUP, the coordinate system you choose will be used to
display all position fixes, including current position, initial position, way-
points, and fixes in the buffer. (This may not occur when British grid, Irish
grid, or UPS coordinates are selected. Please refer to Appendix 5.)
When you select latitude/longitude (LAT/LON), position displays look like
this:
COORDINATES
LAT/LON
3-8
NOTE
tion.
POS
3D
~!
DATAPORTS
PORT1
DATAPORTS
PORT1
9600 BPS
34`04.00N
117`55.95W
103m ALT
ProMARK X
LOG
~!
LOG
~!
~
Advertisement
Chapters
