Advertisement
For Machines with an Electric
Cargo Bed Lift
1.
Rotate the cargo bed so that the hinge-bracket
assembly and prop rod are facing downward
(Figure
13).
2.
Using lifting equipment at the front and rear
of the cargo bed, raise the cargo bed, and
align it over the frame of the machine with the
hinge-bracket assembly facing rearward
13).
3.
Secure the lift actuator rod to the inboard and
outboard lift brackets using the previously
removed hex-head bolt (1/2 x 5-1/2 inches),
locknut (1/2 inch), clevis pin (3-1/2 inches), and
hairpin cotter
(Figure
Figure 16
1. Locknut (1/2 inch)
2. Hex-head bolt (1/2 x 5-1/2
inches)
3. Hairpin cotter
4.
Secure the hinge brackets to the rear frame
channel using the previously removed 4
flanged-head bolts (3/8 x 1 inch) as shown in
Figure
15.
5.
Torque the 4 flanged-head bolts to 37 to 45 N∙m
(27 to 33 ft-lb).
(Figure
16).
4. Lift actuator rod
5. Clevis pin (3-1/2 inches)
8
Connecting the Battery
No Parts Required
Procedure
1.
Connect the positive battery cable to the terminal
of the battery
2.
Connect the negative battery cable to the
terminal of the battery
3.
Install the battery cover onto the top of the
battery
(Figure
g226666
12
(Figure
2).
(Figure
2).
2).
Advertisement
