Connecting With The Discharge Tube - Toro 79390 Operator's Manual

G015223
Figure 27
1. Upper latch
8. Secure the chute to the mower deck by hooking the
flexible latch on the chute to the retaining clasp welded
on the mower deck (Figure
1
2
2. Flexible latch
27).
7
Connecting with the Discharge
Tube
Parts needed for this procedure:
1 Discharge tube
Procedure
1. Slide the curved end of the discharge tube into the
opening in the bagger top
1
3
4
1. Discharge tube
2. Opening in bagger top
3. Discharge tube, flared end
2. Slide the flared end of the discharge tube over the
end of the chute. Move the rubber retaining strap on
the chute snaps over the peg on the discharge tube to
secure it (Figure
3. After the bagger installation, install the wire onto the
spark plug(s).
14
(Figure 28).
2
G010641
5
Figure 28
4. Peg
5. Rubber strap
28).