Toshiba PT930 User Manual page 38

User's Manual
HDD automatic
power off
System automatic
Standby/Hibernation
Keypad overlay
Power on password
Instant security
Intelligent
power supply
Battery save mode
Panel power off/on
Low battery
automatic hibernation
1-10
This feature automatically cuts off power to the hard disk
drive when it is not accessed for a time specified. Power is
restored when the hard disk is accessed. You can specify
the time in the Turn off hard disks item of the Power Save
Mode window in TOSHIBA Power Saver.
This feature automatically shuts down the system in
standby mode or Hibernation mode when there is no input
or hardware access for a time specified. You can specify
the time and select either System Standby or System
Hibernate in the System standby and System hibernate
item of the Power Save Mode window in TOSHIBA Power
Saver.
A ten-key pad is integrated into the keyboard. Refer to the
Keypad overlay
instructions on using the keypad overlay.
Two levels of password security, supervisor and user, are
available to prevent unauthorized access to your com-
puter.
A hot key function blanks the screen and disables the
computer providing data security.
A microprocessor in the computer's intelligent power
supply detects the battery's charge and calculates the
remaining battery capacity. It also protects electronic
components from abnormal conditions, such as voltage
overload from an AC adaptor. You can monitor remaining
battery capacity. Use the Battery remaining item of the
Power Save Modes window in TOSHIBA Power Saver.
This feature lets you save battery power. You can specify
the Power Save Mode in the Running on batteries item of
the Power Save Modes window in TOSHIBA Power Saver.
This feature turns power to the computer off when the
display panel is closed and turns it back on when the panel
is opened. You can specify the setting in the When I close
the lid item of the System Power Mode window in
TOSHIBA Power Saver.
When battery power is exhausted to the point that
computer operation cannot be continued, the system
automatically enters Hibernation and shuts down. You can
specify the setting in the Battery Alarm item of the Alarm
window in TOSHIBA Power Saver.
Get other manuals https://www.bkmanuals.com
section in Chapter 5, Keyboard, for