8. With the HDD in a vertical position, lift it straight up and away from the
connector.
Installing the HDD pack
To install the HDD pack, follow the steps below.
1. Move the connector until it is vertical.
2. Hold the HDD vertically with its label on the left.
3. Connect the HDD to the connector.
Ensure that the HDD is connected to the connector in a vertical position.
If the HDD is slanted and connected to the connector, it might damage the
connector.
4. With the connector connected, lower the HDD down to the storage
position.
5. Seat the cover and press down until the latches click into place.
6. Secure the cover with a screw.
7. Return your computer to the upright position.
User's Manual
HDD pack
Removing the HDD pack
Installing the HDD pack
Optional Devices
Plastic tab
Plastic tab
8-11