LG DF22 V2BR Series Owner's Manual page 63

Hide thumbs Also See for DF22 V2BR Series:
Table of Contents

Advertisement

Symptoms
Lint is left on clothes.
Excess static in clothes
after drying.
Clothes have damp
spots after a Sensor
Dry programme.
Steam Functions
Symptoms
Water drips from
nozzle when Ciclo de
Vapor (Steam Cycle)
starts.
Garments still
wrinkled after Steam
Fresh.
Clothes have not been sorted properly.
• Some fabrics are lint producers (i.e., a fuzzy white cotton towel) and should
be dried separately from clothes that are lint trappers (i.e., a pair of black
linen pants).
Appliance is overloaded.
• Divide extra large loads into smaller loads for drying.
Tissue, paper, etc., has been left in pockets.
• Check pockets thoroughly before drying clothes.
Clothes have dried for too long (overdried).
• Overdrying a load of clothes can cause a buildup of static electricity. Adjust
settings and use a shorter drying time, or use Sensor Dry programmes.
Drying synthetics, permanent press, or synthetic blends.
• These fabrics are naturally more prone to static buildup. Try using fabric
softener, or use shorter Timed Drying time settings.
Very large load or very small load. Single large item such as a blanket or
comforter.
• If items are too tightly packed or too sparse the sensor may have trouble
reading the dryness level of the load. Use a Timed Drying programme for
very small loads.
• Large, bulky items such as blankets or comforters can sometimes wrap
themselves into a tight ball of fabric. The outside layers will dry and
register on the sensors, while the inner core remains damp. When drying
a single bulky item, it may help to pause the cycle once or twice and
rearrange the item to unwrap and expose any damp areas.
• To dry a few remaining damp items from a very large load or a few damp
spots on a large item after a Sensor Dry programme has completed, empty
the lint filter, then set a Timed Drying programme to finish drying the
item(s).
This is normal.
• This is steam condensation. The dripping water will stop after a short time.
Too many or overly different types of garments in appliance.
• Small loads of 1 to 5 items work best. Load fewer garments. Load similar
types of garments.
TROUBLESHOOTING
Possible Cause & Solution
Possible Cause & Solution
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Df50 v2br seriesDf22vv2sbrDf22bv2breDf22bv2br

Table of Contents