LG DF22 V2BR Series Owner's Manual page 59

TROUBLESHOOTING
Before Calling for Service
The dryer is equipped with an automatic error-
monitoring system to detect and diagnose
problems at an early stage. If the dryer does not
Error Messages
Symptoms
through
tE1 tE7
TEMPERATURE SENSOR
ERROR
Ps
POWER ERROR
, , ,
d7s d8O dGO dGs
DUCT BLOCK ERROR
[L
Bloqueo de Panel
(Control Lock)
FUNCTION
6IQ
Vapor (Steam)
FUNCTION
Temperature sensor failure.
• Turn off the appliance and call for service.
Power cord is connected incorrectly.
• Check the connection of the power cord to the terminal block.
The duct work is about 75% - 95% blocked. (The error code is displayed
for 2 hours only.)
• Do not use the appliance until the exhaust system has been cleaned and/
or repaired. Using the appliance with a severely restricted exhaust is
dangerous and could result in a fire or other property damage.
• Check the outside dryer vent while the appliance is operating to make sure
there is strong airflow. If the exhaust system is extremly long, have it
repaired or rerouted.
House exhaust system blocked.
• Keep the area around the appliance clean and free of clutter. Check vent
hood for damage or lint clogging. Make sure the area around the vent
hood is clear.
The Bloqueo de Panel (Control Lock) function is on to prevent anyone
from changing programmes or operating the appliance.
• Turn off the Bloqueo de Panel (Control Lock) function in the control
panel. See Bloqueo de Panel (Control Lock) under Options and Extra
Functions.
The Más Tiempo (More Time) button was pressed.
• This display indicates that the Vapor (Steam) function has been set for a
"big" item such as a comforter.
• Press the Menos Tiempo (Less Time) button to reduce the indicated load
size.
TROUBLESHOOTING
function properly or does not function at all, check
the following before you call for service.
Possible Cause & Solution
59