Table of Contents
Advertisement
INSTALLATION
34
1)
Connect the straight end of the long
hose
to the cold water faucet.
b
• Type 2 : WITH WASHER (The dryer shares the
faucet with the washing machine.)
1)
Shut off the cold water tap and remove
the washer inlet hose.
2)
Connect the short hose
connector
seals.
3)
Connect the other end of the short hose
to the cold water faucet.
c
4)
Connect the long dryer hose
side of the Y-connector
washer hose to the washer and the
other side of the Y-connector
NOTE
• Before connecting the water line to the dryer,
flush out the hose with several gallons of water
into a drain or bucket. This will help prevent
to the Y-
c
using one of the rubber
d
to one
b
. Connect the
d
.
d
foreign particles such as sand and scale from
clogging the dryer inlet valve.
3
Connect the long dryer hose
inlet valve tightly by hand and then tighten
another 2/3 turn with pliers.
4
Turn on the cold water faucet.
5
Check all hoses and Y-connectors (if used) for
leaks.
to the dryer
b
Advertisement
Table of Contents
