VTech SIP Contemporary Series User Manual page 19

• The TALK key on the cordless handset
and the LINE key on the telephone base
flash when the call is on hold.
To take the call off hold:
1. Press TALK or
LINE or on the telephone base or the call
will end automatically after the preset call on
hold duration.
• The TALK key illuminates when in use.
The key illuminates when in
speakerphone mode.
Answer a call using the telephone base
On the telephone base, press
• The key illuminates when in use.
Find handset
Use this feature to find all registered cordless
handsets.
To start paging:
Press /FIND HANDSET on the telephone base
when the phone is not in use. All idle cordless
handsets beep for 60 seconds.
To end paging:
• Press /FIND HANDSET again on the
telephone base.
-OR-
• Press any key on the cordless handset to
stop the paging tone.
Computer port
You can route your computer through the
COMPUTER port (RJ-45) on the side of the
telephone base to get Internet access.
USB port
The port on the side of the telephone base
can be used for charging devices (up to 500mA
@ 5V). Charging will be suspended when there
is an incoming call or the telephone is in use.
on the handset, OR press
.
EN - 19