Table of Contents
Advertisement
100
Basic features
Setting the timer to turn on the TV
❖
❖
Displaying TV status information
To display TV status information, press INFO.
The following information will be displayed (if applicable):
Current input (ANT/CABLE, Video, etc.)
❖
Either "CABLE" (for cable TV) or "ANT" (for over-the-air
❖
broadcasts), if ANT/CABLE is the current input
Channel number (if in ANT/CABLE mode)
❖
Input label (if set)
❖
Digital signal strength indicator (for ATSC/QAM signals only)
❖
Stereo, Mono, or SAP audio status (when in HDMI
❖
PCM)
Video resolution
❖
Aspect ratio of incoming video signal (4:3 or 16:9)
❖
GameTimer (if set)
❖
Channel Label (if set or received)
❖
Current display mode (Side by Side, Top and Bottom, or Frame
❖
Packing)
Current display format (3D, 2D to 3D, or 3D to 2D)
❖
Input video format (3D appears when video format is 3D)
❖
To close the screen, press the INFO button again.
The following additional information (only available for ANT/CABLE
input) will display for digital channels (if applicable):
Title
❖
Duration
❖
Detailed description
❖
Next program's information
❖
The power consumption during Active Standby is more than it during
Normal Standby.
After the change from Power On state to Active Standby, there may be a
period of several seconds when the TV does not receive the operation
from a remote control or external apparatus.
Get other manuals https://www.bkmanuals.com
™
input mode,
Advertisement
Table of Contents
