Setting Up Hdmi ® Cec; Displaying Tv Status Information - Toshiba 50L2200U User Manual

Integrated high definition led television
Hide thumbs Also See for 50L2200U:
Table of Contents

Advertisement

NOTE
Setting up HDMI
To set the HDMI
1
From the Setup menu, highlight HDMI
press the ENTER button.
2
Press the ( /
HDMI
3
Press the ( /
NOTE
4
Press the ( /
HDMI
arrow) buttons to select On or the desired mode.
5
To save the new settings, highlight Done and press the
ENTER button.
To revert to the factory defaults, highlight Reset and press the
ENTER button.

Displaying TV status information

To display TV status information using the RECALL button:
Press the RECALL button on the remote control.
The following information will be displayed (if applicable):
Current input (ANT/CABLE, Video, etc.)
If ANT/CABLE is the current input, either "CABLE" (for
cable TV) or "ANT" (for over-the-air broadcasts).
Channel number (if in ANT/CABLE mode)
Displaying TV status information
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver's speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
®
CEC
®
CEC Setup:
arrow) buttons to highlight Enable
®
CEC.
arrow) buttons to select On.
If you select Enable HDMI
out.
arrow) buttons to highlight the
®
CEC Setup item you want to use, and press the ( /
TV Auto Input Switch: On/Off
TV Auto Power: On/Off
Device Auto Standby: On/Off
Speaker Preference: TV Speakers/Audio Receiver
Using the TV's features
®
CEC Setup and
®
CEC Off, the other items will be grayed
107

Advertisement

Table of Contents
loading

Table of Contents