Setting Up Hdmi ® Cec; Displaying Tv Status Information - Toshiba 39L22U User Manual

Setting up HDMI
To set the HDMI
1 From the Setup menu, highlight HDMI
press the ENTER button.
2 Press the ( /
HDMI
Press the ( /
3
NOTE
4 Press the ( /
Setup item you want to use, and press the ( /
to select On or the desired mode.
❖
❖
❖
❖
5 To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset, and then
press the ENTER button.

Displaying TV status information

To display TV status information using the RECALL button:
❖
Press the RECALL button on the remote control.
The following information will be displayed (if applicable):
❖
Current input (ANT/CABLE, Video, etc.)
❖
If ANT/CABLE is the current input, either "CABLE" (for
cable TV) or "ANT" (for over-the-air broadcasts)
❖
Channel number (if in ANT/CABLE mode)
❖
Digital signal strength indicator (bar graph in lower right
corner of box; for ATSC signals only)
❖
Stereo, Mono, or SAP audio status (when in HDMI
mode, Dolby
❖
Video resolution
Displaying TV status information
®
CEC
®
CEC Setup:
arrow) buttons to highlight Enable
®
CEC.
arrow) buttons to select On.
If you select Enable HDMI
out.
arrow) buttons to highlight the HDMI
TV Auto Input Switch: On/Off
TV Auto Power: On/Off
Device Auto Standby: On/Off
Speaker Preference: TV Speakers/Audio Receiver
®
Digital, or PCM)
Using the TV's features
®
CEC Setup and
®
CEC Off, the other items will be grayed
107
®
CEC
arrow) buttons
®
input