Turning The Heater On And Off; Adjusting The Flame Height - FireplaceXtrordinair ProBuilder 24 CleanFace MV Owner's Manual

Turning the Heater On and Off

After the pilot has been started...
O
O
ON/OFF SWITCH
Use this switch to turn the main
burner on and off manually.

Do not place any combustible items on top of or directly in front of the heater, even temporarily. The
optional thermostat may start the heater causing a combustible item to ignite.

If the heater turns on and off frequently while using the thermostat, you may want to adjust the flame
height down until it produces just enough heat needed.

Adjusting the Flame Height


Your heater has an adjustable flame to tailor the look and heat output to your specific needs. It is
adjusted by turning the middle dial on the gas control valve.
Flame Height
Adjustment Knob
© Travis Industries
Operation
Turn counter-clockwise to adjust the flame higher, clockwise to lower.
10/12/21 - 1513
OPTIONAL REMOTE THERMOSTAT
See the instructions included with the remote
for details on operation.
Index Mark
9
PB 24 CF MV Operation