Table of Contents
Advertisement
Chapter 14
Follow the steps below to allow remote devices to manage the modem router over
HTTPS.
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to
Advanced
Management
section.
3. Tick the check box to enable
via HTTPS
to allow for HTTPS connection. Keep the
4. Set the client device allowed for remote management. Select
devices to manage the modem router. If you just want to allow a specific device to
manage the modem router, select
IP/MAC address of the remote device.
5. Click Save.
All devices or the specific device on the internet can log in to your router using the
address displayed on the
modem router.
Tips:
1. If you were warned about the certificate when visiting the web management page remotely, click
option) to continue. To avoid this warning, you can download and install the certificate on the modem router's web
management page at
Advanced
2. The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
>
System Tools
>
Remote
Management. Enable
Only the Following IP/MAC Address
Manage This Router via the Address
>
System Tools
> Administration.
Administrate Your Network
Administration
page. Locate the
Port
as the default setting.
Set Up a Dynamic DNS Service Account
Remote
Remote Management
All
to allow all remote
and enter the
field to manage the
Trust
(or a similar
if you want to log
77
Advertisement
Table of Contents
