Table of Contents
Advertisement
Chapter 13
6. When the LED turns green solid, the client device has successfully connected to
the modem router.
Method 3: Enter the modem router's PIN on your client device
Use this method if your client device asks for the modem router's PIN.
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to
Advanced
3. Take a note of the Current PIN of the modem router. You can also click the
button to get a new PIN.
4. On the client device, enter the modem router's PIN. (The default PIN is also printed
on the label of the modem router.)
5. The LED of the router flashes quickly.
6. When the LED turns green solid, the client device has successfully connected to
the modem router.
Note:
The WPS function cannot be configured if the wireless function of the modem router is disabled. Please make sure the
wireless function is enabled before configuring WPS.
Method 4: Enter the client device's PIN on the modem router
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to
Advanced
3. Select
Client's
PIN.
4. Enter the client device's PIN in the field. Then click the
5.
Connect successfully
device has successfully connected to the modem router.
>
Wireless
>
WPS
page. Click
>
Wireless
>
WPS
page. Click
will appear on the above screen, which means the client
Specify Your Network Settings
Method
Two--PIN.
Method
Two--PIN.
Connect
button.
Generate
61
Advertisement
Table of Contents
