Mounting The Battery Charger On A Wall; Product Overview - Toro 04861 Operator's Manual

4
Mounting the Battery
Charger on a Wall
Optional
No Parts Required
Procedure
You can mount the charger on a wall using the
wall-mount key holes cut into the back of the unit. Use
screws that have a 6 mm (1/4 inch) diameter shaft
and a head diameter of 11 mm (0.45 inch).
Important:
Survey your work area and determine
a location that best meets the criteria for safe and
effective operation of the charger.

Product Overview

1. Grass basket
2. Kickstand
3. Handle
8
Figure 6
4. Battery pack
5. Transport-wheel axle
6. Cutting unit
g308085