Memory 1 And Memory 2 Buttons; Message Button; Hold Button - Cortelco CALLER ID TYPE 2 9120 Owner's Instruction Manual

MEMORY 1 and MEMORY 2 BUTTONS

These buttons are used to access the one-touch speed dial memory. See the SPEED
DIAL section of this manual for specific instructions.

MESSAGE BUTTON

If you have a voice mail service, the large red indicator above the display will flash to
alert you that you have new messages. The display will also show an icon of an
envelope. The 9120 will only detect FSK message waiting signals.
Press MESSAGE to retrieve your messages. This button will dial out *98 which is a
common code to retrieve messages. If your service requires a different code, you can
program the MESSAGE button by following the instructions for programming one-
touch memory in the Speed Dial section.

HOLD BUTTON

1. Press HOLD and hang up the handset. HOLD will light and remain lighted until you
resume your conversation.
2. To resume your conversation, lift the handset or that of any extension phone on the
same line. The HOLD indicator will go out and your call can continue.
15