Unit Setup - Cortelco CALLER ID TYPE 2 9120 Owner's Instruction Manual

Use MENU to enter the setup screen.
1. Press MENU. PHONE BOOK appears on the display. The Phone Book is covered
in a later section.
2. Press . When CALL WAITING appears, press ENTER. Then use
feature ON or OFF. If this is set to OFF, Caller ID information will not be displayed
for a Call Waiting call. Press ENTER to exit.
3. Press . When DATE FORMAT appears, press ENTER. Then use
Month-Day (MM-DD) and Day-Month (DD-MM). Press ENTER to exit.
4. Press . When HOUR FORMAT appears, press ENTER. Then use to select either
12 hour or 24 hour time display. Press ENTER to exit.
5. Press . When SET FLASH appears, press
ms and 100ms. Press ENTER to exit.
6. Press . When SET AREA CODE appears, use the keypad to enter the area code in
which the phone will be used. This is necessary so that the # key can change dialing
formats (7 digits, 10 digits, 11digits).
7. Press . When SET LANGUAGE appears, press
(English), FRENCH and SPANISH. Press ENTER to exit. Note that pressing
ENTER now returns the phone to the idle screen.
NOTE: If you have Caller ID service, the time will be automatically set. Use Step 8
only if you do not have Caller ID. If you wish to display the Day of the Week,
you will need to set the year since Caller ID does not include this.
8. Press MENU. Then press
time.
a. The "tens" digit in the hour is flashing. Use
ENTER.
b. The "ones" digit in the hour is flashing. Use
ENTER.
c. The "tens" digit in the minute is flashing. Use or to set this digit. Then press
ENTER.
d. The "ones" digit in the minute is flashing. Use or to set this digit. Then press
ENTER.
e. The "tens" digit in the month is flashing. Use or to set this digit. Then press
ENTER.
f. The "ones" digit in the month is flashing. Use or to set this digit. Then press
ENTER.
g. The "tens" digit in the day is flashing. Use
ENTER.
h. The "ones" digit in the day is flashing. Use
ENTER.
i. The "tens" digit in the year is flashing. Use
ENTER.
j. The "ones" digit in the year is flashing. Use
ENTER.
k. The cursor for the day of the week will begin flashing. Use or to toggle this
on or off.
Press MENU to return to the idle screen.
l.
NOTE: LCD Contrast may also be set using the Contrast button on the LCD screen.

UNIT SETUP

to select between 600ms, 300 ms, 120
or until SET TIME appears. Press ENTER to set the
11
to toggle this
to select either
to select between USA-UK
or to set this digit. Then press
or to set this digit. Then press
or to set this digit. Then press
or to set this digit. Then press
or to set this digit. Then press
or to set this digit. Then press