Table of Contents
Advertisement
c.
When your party answers, adjust the volume of the conversation by pressing
the Volume Bar on the base of the telephone.
d.
After the conversation has finished, press and release SPEAKERPHONE to
hang up.
Note:
1.
If you wish to switch from speakerphone to handset, simply lift the handset.
2.
If you wish to switch from handset to speakerphone, press and release
SPEAKERPHONE and then hang up the handset.
DURATION COUNTER
A built-in counter will start counting 6 seconds after you lift the handset or 6 seconds
after you dial a telephone number.
MUTE BUTTON
Press MUTE to speak without the person on the phone hearing your conversation. The
MUTE Indicator will light up and remain lighted until you resume your conversation. Also,
"MIC MUTED" will show in the display. To resume the conversation, press MUTE. The
MUTE indicator will go out and your call can continue.
AUTOMATIC MEMORY
To Store A Number In Memory:
1.
Press the SAVE button, [SAVE TO?] appears on the display
window.
2.
Press the desired memory location. (M1-M10)
3.
[ENTER NUMBER>] appears on the display.
4.
Enter the desired number using the keypad (maximum of 24 digits). Press SAVE to
confirm.
5.
[ENTER NAME>] will appear. Type the name using the keypad. Press SAVE again
to confirm all settings.
6.
[MEMORY STORING] will show briefly.
Note: The memory locations can be chained together to store numbers of
longer length.
To Dial A Phone Number In Memory
1.
Press the desired memory location (M1-M10)
2.
The number will be displayed.
3.
To dial the number, lift the handset, press theSPEAKERPHONE button or press the
DIAL button.
VOLUME BUTTON
A built-in amplifier feature allows you to increase the listening volume in the receiver of
the handset when speaking with your party. When needed, press the VOLUME button
7
Advertisement
Table of Contents
