Using Your Telephone; Line Use Indications; Handset Operation Placing A Telephone Call; Answering A Telephone Call (Co Line Or Intercom) - Cortelco 1 4-Line Multi-User Owner's Manual

Using Your Telephone

Line Use Indications

Each Line Button has an indicator to show you the status of the
telephone line, as shown below:
No Light
Blinks once every 2 seconds
Quickly blinks on and off repeatedly
Slowly blinks on and off repeatedly
Fast Flash
Constantly lit
Handset Operation

Placing a Telephone Call

1. Lift the handset.
NOTE: The first available line will automatically be selected. You may press
a line button to dial out from a specific line.
2. Dial the telephone number you wish to call. The number will appear
on the display window.
3. After the conversation has finished, place the handset back in the
cradle to disconnect.

Answering a Telephone Call (CO Line or Intercom)

1. When your station rings from an outside line call or an intercom
call, pick up the handset to answer.
2. After the conversation has finished, place the handset back in the
cradle to disconnect.

Placing an Intercom Call

1. Lift the handset.
2. Press the
handset.
3. Dial the extension number you wish to call.
NOTE: After pressing the
dial buttons as station select buttons. The buttons are
preprogrammed as extensions 11 thru 22, from left to right, top to
bottom.
4. After the conversation has finished, place the handset back in the
cradle to disconnect.
Speakerphone and Headset (when activated) Operation
button. The display will show ICM, the
button will light, and you will hear intercom tone in the
Line is available, if connected
Line is in use by this phone
Line is on hold by this phone
Line is on hold by another phone
Line is ringing
Line is in use by another phone
button, you may use the first 11 speed
10