Disconnect the display panel cable by opening the metal locking bar and then releasing the cable in a
horizontal direction (3). Remove the cable (4).
6.
If you need to remove the antenna cables, peel and remove the auxiliary antenna (1), and the main
antenna (2). Disengage the cables from the clips at the bottom of the cover and then remove the
antennas and cables (3).
Antenna cables are available as spare part number N13572-001.
Display back covers with antennas are available as spare part number N13573-001 in natural silver
finish.
7.
If you need to remove the hinges from the display enclosure:
a.
Release the right antenna from the display hinge (1).
b.
Remove the six Phillips broadhead M2.5 × 2.5 screws (2) from each hinge.
c.
Remove the two Phillips broadhead M2.5 × 4.0 screws (3) from each hinge.
Display assembly
57