Table of Contents
Advertisement
2.
Before replacing the display panel assembly, thoroughly clean all adhesive residue from the display
panel. Remove the protective backing from the new adhesive strips, align the holes (1) on the strips with
the pins (2) on the display panel assembly, and then attach the strips to the display panel assembly.
3.
If you need to remove the camera module:
Using a utility tool, lift up evenly across the camera module (1), and then peel the module up from
■
the display back cover (2). Disconnect the cable from the reverse ZIF connector on the module (3),
Display assembly
55
Advertisement
Table of Contents
