Table of Contents
Advertisement
Third Edition • Third Printing
Transport and Lifting Instructions
Observe and Obey:
Common sense and planning must be applied to
control the movement of the machine when
lifting it with a crane or forklift.
The transport vehicle must be parked on a level
surface.
The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. See the serial plate for the
machine weight.
The machine must be on a level surface or
secured before releasing the brakes.
Part No. 82750
Genie GS-2668 DC and Genie GS-3268 DC
Brake Release
Operation
1 Chock the wheels to prevent the machine from
rolling.
2 Be sure the winch line is properly secured to the
drive chassis tie points and the path is clear of
all obstructions.
3 Before serial number 43180: Turn the brake
release knob counterclockwise to open the
brake valve.
After serial number 43179: Push in the brake
release knob to open the brake valve.
4 Pump the brake release pump knob.
After the machine is loaded:
1 Chock the wheels to prevent the machine from
rolling.
2 Before serial number 43180: Turn the brake
release knob clockwise to reset the brakes.
After serial number 43179: Press and hold the
function enable switch on the control handle.
Move the control handle off center to reset the
brakes.
Towing the Genie GS-2668 DC or the Genie
GS-3268 DC is not recommended. If the machine
must be towed, do not exceed 2 mph / 3.2 km/h.
Operator's Manual
25
Advertisement
Table of Contents
