11
SERVICE WORK ON THE CHASSIS
11.16
Removing the start number plate
11.17
Installing the start number plate
11.18
Removing the front fender
-
-
101680-10
-
Position the start number plate. Mount and tighten screw
Info
Make sure that the holding lugs engage in the fender.
-
Position the brake line and clamp. Mount and tighten screw
101681-10
Preparatory work
-
Remove the start number plate. (
Main work
-
101724-10
and take off the clamp.
1
. Take off the start number plate.
2
p. 41)
and
. Remove the front fender.
1
2
.
1
.
2
41