Limited Slip Differential Lock Kit
CT Series Turf Mower or Groundsmaster
Unit
Model No. 02904—Serial No. 400000000 and Up
This kit provides a limited slip differential to improve traction when traction is reduced in certain ground conditions.
This product contains a chemical or chemicals known to the State of California to
Important: Use of the limited slip differential lock kit is not recommended for machines that are operated for
extended periods on the road. If you anticipate operating the machine on the road extensively, request that your
dealer/distributor service provider limit the ground speed of the machine to 16 km/h (10 mph).
Preparing to Install the Limited
Slip Differential Lock Kit
Preparing the Machine
1. Park the machine on a level surface.
2. Disengage and lower the cutting units.
3. Engage the parking brake.
4. Shut off the engine and remove the key from the key
switch.
5. Wait for all moving parts to stop.
6. Allow the engine to cool completely.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
WARNING
CALIFORNIA
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
Register at www.Toro.com.
®
3400 Series Traction
Opening the Hood
1. Insert the hood key into the lock for the hood and
rotate the lock 90° counterclockwise
2. Press the button of the hood latch
3. Carefully rotate the hood back and down
Original Instructions (EN)
All Rights Reserved *3410-516* A
Printed in the UK
Form No. 3410-516 Rev A
Installation Instructions
(Figure
1).
(Figure
1).
Figure 1
(Figure
g189331
2).