Table of Contents
Advertisement
Scanning
>
Scanning Originals to a Network Folder
Note:
Make sure the printer's Date/Time and Time Difference settings are correct. Access the menus from Settings > General
Settings > Basic Settings > Date/Time Settings.
1. Place the originals.
"Placing Originals" on page 35
2. Select Scan > Network Folder/FTP on the control panel.
3. Specify the destination.
"Destination Menu Options for Scanning to a Folder" on page 92
Note:
You can print the history of the folder in which documents are saved, by selecting
4. Select Scan Settings, and then check settings such as the save format, and change them if necessary.
"Scan Menu Options for Scanning to a Folder" on page 93
Note:
Select
to save your settings as a preset.
5. Tap
x
.
Destination Menu Options for Scanning to a Folder
Keyboard:
Open the Edit Location screen. Enter the folder path and set each item on the screen.
Edit Location:
Enter the folder path and set each item on the screen.
❏ Communication Mode:
Select the communication mode for the folder.
❏ Location (Required):
Enter a folder path in which to save the scanned image.
❏ User Name:
Enter a user name to log on to the specified folder.
❏ Password:
Enter a password corresponding to the user name.
❏ Connection Mode:
Select the connection mode for the folder.
❏ Port Number:
Enter a port number for the folder.
Contacts:
Select a destination from the contacts list.
>
Destination Menu Options for Scanning to a Folder
92
.
Advertisement
Table of Contents
