Compressor Units; Figure 12 - Dimensions - Compressor Units - York YK Installation Instructions Manual

SECTION 2 - INSTALLATION
COMPRESSOR
OPTIVIEW
CONTROL
CENTER
NOTES:
1. All dimensions are ft-inches (mm).
2. All dimensions are approximate. Certified dimensions are available on request.
3. For all waterboxes (compact boxes shown above), determine overall unit length by adding waterbox depth to tube sheet length.
4. Water nozzles can be located on either end of unit. Add 1/2 in. (12 mm) to nozzle length for flanges connections.
5. To determine overall height, add dimension "M" in ADDITIONAL OPERATING HEIGHT on page 28 for the appropriate isolator type.
6. Use of motors with motor hoods may increase overall unit dimensions.
FIGURE 12 - DIMENSIONS – COMPRESSOR UNITS
28

COMPRESSOR UNITS

MOTOR
ADDITIONAL OPERATING HEIGHT
CLEARANCE TO FLOOR
TYPE OF CHILLER MOUNTING
NEOPRENE PAD ISOLATORS
SPRING ISOLATORS 1" DEFLECTION
DIRECT MOUNT 3/4"
FORM 160.76-N1
ISSUE DATE: 06/21/2019
CONDENSER
EVAPORATOR
(SHIPPING WIDTH)
M DIMENSION
1-3/4"
(45)
1"
(25)
3/4"
(19)
JOHNSON CONTROLS
LD07134