Section 3 - Dimensions, Nozzle Arrangements, And Weights; Compressor Unit Dimensions; Figure 11 - Dimensions Of 197 And 205 Compressor Units, Ft-In. (Mm) - York YMC 2 Manual
Centrifugal liquid chillers
Hide thumbs
Also See for YMC 2:
- Operation and maintenance (146 pages) ,
- Installation and assembly manual (74 pages) ,
- Manual (71 pages)
Table of Contents
Advertisement
Form 160.78-N1
Issue date: 2/02/2022
Section 3 - Dimensions, nozzle arrangements, and weights
Type of chiller mounting
Neoprene pad isolators
Spring isolators 1 in. deflection
Direct mount
Evaporator
Condenser
code
code
EA2510
CA2110
EA2510
CA2510
EA2514
CA2514
:
NOTES
1. All dimensions are approximate. Certified dimensions are available on request.
2. Standard water nozzles are Schedule 40 pipe size, furnished as welding stub-outs with ANSI/AWWA C-606 grooves, allowing the option
of welding, flanges, or use of ANSI/AWWA C-606 couplings. Factory-installed, class 150 (ANSI B16.5, round slip-on forged carbon steel
with 1/16 in. raised face), water flanged nozzles are optional (add 1/2 in. to nozzle length). Companion flanges, nuts, bolts, and gaskets
are not furnished.
3. One, two, and three-pass nozzle arrangements are available only in pairs shown for all shell codes. Any pair of evaporator nozzles may
be used in combination with any pair of condenser nozzles Compact waterboxes on one heat exchanger may be used with marine water-
boxes on the other heat exchangers.
4. Condenser water must enter the waterbox through the bottom connection for proper operation of the sub-cooler to achieve rated perfor-
mance.
5. To determine overall height, add dimension M for the appropriate isolator type.
VSD
CONTROL
PANEL
C
A
Figure 11 - Dimensions of 197 and 205 compressor units, ft-in. (mm)
JOHNSON CONTROLS
Compressor unit dimensions
Additional operating height clearance to floor Ft - in. (mm)
Dimensions - 197 and 205 compressor units Ft - in. (mm)
A
5 ft 5 in.
7 ft 4 in.
(1651)
(2235)
5 ft 5 in.
7 ft 9 in.
(1651)
(2362)
5 ft 5 in.
7 ft 9 in.
(1651)
(2362)
H
B
M
D
F
(EVAP.)
3-3/8"
M
1 3/4 in. (45)
1 in. (25)
3/4 in. (19)
B
C
1 ft 3 1/2 in.
(394)
1 ft 3 1/2 in.
(394)
1 ft 3 1/2 in.
(394)
COMPRESSOR
CONTROL
PANEL
E
D
E
1 ft 3 1/2 in.
10 ft 0 in.
(394)
(3048)
1 ft 3 1/2 in.
10 ft 0 in.
(394)
(3048)
1 ft 3 1/2 in.
14 ft 0 in.
(394)
(4267)
VSD
MOTOR
J
G
(EVAP.)
LD07134
3
25
Advertisement
Table of Contents
