Counter And Timer Control - Omron STC-MBS43POE User Manual

9.15

Counter And Timer Control

Controls "Timer" and "Counter".
A) Timer Control
GenICam Parameters
TimerSelector
TimerDelay
TimerDuration
TimerTrigger
Source
TimerTrigger
Activation
TimerValue
When the timing of "Timer 0 active" signal is adjusting to active signal of Exposure, "Timer 0" can be used as
strobe control signal.
B) Counter Control
GenICam Parameters
CounterSelector
CounterEvent
Source
CounterReset
Source
CounterReset
Activation
CounterReset
CounterValue
STC-MBS43POE / STC-MCS43POE
Product Specifications and User's Guide
IEnumeration Type Fixed as "Timer 0"
IInteger Type Delay for "Timer 0 active" signal (in µsecond)
Range: 0 to 16,777,215
Default: 0
IInteger Type Duration of "Timer 0 active" signal (in µsecond)
Range: 1 to 16,777,215
Default: 1
IEnumeration Type Reference signal selection to generate "Timer 0 active" signal
Default: "Off"
IEnumeration Type Polarity of reference signal to generate "Timer 0 active" signal
Default: "Rising Edge"
IInteger Type Returns value for "Timer 0 active" signal
IEnumeration Type Counter selection
Default: "Counter 0"
IEnumeration Type Counter event source selection
IEnumeration Type Reference signal selection to reset counter
IEnumeration Type Polarity of reference signal to reset counter
ICommand Type Rest switch
"Activate as switch when selecting "Software" at "Counter Reset Source"
IInteger Type Returns number of counter
No.18S112-ES01
51/70