Sony Handycam DCM-M1 Connection Manual page 5

Sony handycam dcm-m1: connection guide

Now you have set your PC. Let's move on to the MD DISCAM.

Back to MD DISCAM Top page

When you connect the MD DISCAM to your PC, you

need to make Windows settings.

1. Open "Network" from the Control Panel.

2. The configuration window of "Network" appears.

Select the built-in LAN board (the added board or card

in the case of additional installation)and open

"Properties".

3. The configuration window of "TCP/IP

Properties" appears. Check "Specify an IP

address" and set the following.

IP Address:192.168.0.1

Subnet Mask:255.255.255.0

Dcm-m1