Advertisement
Movie size (pixel)
1 : 4 = 144*122
frames/sec
1
The MD DISCAM and the PC have now been disconnected.
Now let's set the PC after the disconnection of MD DISCAM as a precaution.
Back to MD DISCAM Top page
When the settings of the PC connection with the MD
DISCAM have been completed, the home page address
(http://192.168.0.10/) shown on the left appears on the
screen. When it appears, let's view pictures and images on
your PC.
Type the URL shown on the screen of the MD
DISCAM into the address column of Web browsers
(Microsoft(R) Internet Explorer,
Netscape(R)Navigator, etc.), just as you would do to
browse ordinary home pages.
When you access the home page of the MD DISCAM, the
index of pictures/images that were recorded are displayed.
Click an index and you can view a picture or an image on the
browser.
*Viewing pictures on the browser requires the "QuickTime
Plug-in: Version3.0 or above".
3-1. Go back to the index page and select the size of a picture
and the frames per second. When you select fewer frames the
speed of moving the picture to the PC becomes faster and the
file size will become smaller. (Refer to the table on the left.)
3-2. Right click on the blue icon
on the upper right of the index for desired image.
3-3. Then, context menu appears. Select "Save link destination
as"or "Save data in a file".
3-4. Since you will be asked where to save the data, select a
place you wish to save and decide the name of the file. (The
extension is ".mov" for pictures and ".jpg" for images.)
*Pictures are stored in the QuickTime format but the audio is
not at that time.
(QuickTime does not support the ATRAC
format.)
PC: Finish browsing.
MD DISCAM: Press "DISCONNECT".
of a moving/still image
Advertisement
