Advertisement
Back to MD DISCAM Top page
After setting your PC, you need to set the MD DISCAM.
1. Select "ADVANCED" - "PC CONNECT" - "SET UP"
from the menu of the MD DISCAM.
2. Select " Manual". Touching the white up-and-down
arrows with the input pen or using the control dial and set
the following.
IP Address : 192.168.0.10
Net Mask : 255.255.255.0
Gateway : 0.0.0.0
3. Press "EXEC" and restart the MD DISCAM.
4. When the MD DISCAM restarts, select "ADVANCED" -
"PC CONNECT" - "CONNECT" from the menu.
5. In a little while, the display changes to the window as
shown on the left.(When it is accessed from the PC, the icon
on the window starts rotating.)
Now, you have set your MD DISCAM. Let's try to access
the MD DISCAM from your PC.
Advertisement
