Advertisement
Movie size (pixel)
1 : 4 = 144*122
frames/sec
1
The connection between the MD DISCAM and the PC is now over.
Finally, let's make settings of the PC after disconnecting the MD DISCAM as a precaution.
Back to MD DISCAM Top page
When the settings of the PC connection of the MD DISCAM
have been completed, the home page address
(http://192.168.0.10/) shown on the left appears on the
screen. When it appears, let's try to capture pictures and
images to the PC.
Type the URL shown on the screen of the MD DISCAM
into the address column of Web browsers (Microsoft(R)
Internet Explorer, Netscape(R )Navigator, etc.) of the PC
just as you do to browse ordinary home pages.
When you access the home page of the MD DISCAM, the
index of pictures/images that were recorded onto the MD
DISCAM is displayed. Click an index and you can view a
picture and an image on the browser.
*Viewing pictures on the browser requires the "QuickTime
Plug-in: Version 3.0 or newer".
3-1. Go back to the index page and select the size of a picture
and frames per second. When you select fewer frames per
second or a smaller size, the speed of capturing the picture to
the PC becomes faster and the file size becomes smaller as
well. (Refer to the table on the left.)
3-2. Right click on the blue icon
on the upper right of the index of the desired image.
3-3. Then, CONTEXT MENU appears. Select "Save link
destination as" or "Save data in a file".
3-4. As you will be asked where to save the data, set a place
you wish to save and decide the name of the saving file. (The
extension is ".mov" for pictures and ".jpg" for images.)
*Pictures are captured in the QuickTime format but audio is
not captured at that time.
support the ATRAC format.)
PC: Finish browsing.
MD DISCAM: Press "Disconnect".
of a moving/still image
(It is because QuickTime does not
Advertisement
