Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
3. Remove the
display
assembly.
4. Follow the procedure from step 1 to step 2 in
Procedure
CAUTION:
Place the display-panel assembly on a soft and clean surface to avoid scratching the display.
1. Place the display-panel assembly face down on a flat surface.
2. Using a plastic scribe, pry the camera module off the display-panel assembly.
3. Turn the camera over and disconnect the display cable from the camera module.
Removing the camera
computer. After working inside your computer, follow the instructions in
"Removing the display
panel".
Removing the camera
45
After
www.dell.com/
75
Advertisement
Table of Contents
