Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
CAUTION:
Place the display panel on a soft and clean surface to avoid scratching the display.
1. Place the display panel on a flat surface with the display facing down.
2. Replace the
display
cable.
3. Replace the
sensor
board.
4. Replace the camera.
5. Turn over the display-panel assembly.
6. Align the display-panel assembly with the display back-cover and antenna assembly and gently snap the display-panel
assembly into place.
Post-requisites
1. Replace the
display
assembly.
2. Replace the battery.
3. Replace the
base
cover.
Replacing the display panel
computer. After working inside your computer, follow the instructions in
After
www.dell.com/
Replacing the display panel
40
69
Advertisement
Table of Contents
