Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1. Place the status-light board into the slot on the palm rest and keyboard assembly.
2. Slide the status-light board cable into the connector on the keyboard daughter-board and close the latch to secure the
cable.
3. Adhere the foam that secures the status-light board to the palm rest and keyboard assembly.
4. Adhere the status-light board cable to the palm rest and keyboard assembly.
5. Route the speaker cable through the routing guides on the palm rest and keyboard assembly and adhere the tape that
secures the speaker cable to the palm rest and keyboard assembly.
Post-requisites
1. Replace the battery.
2. Replace the
base
cover.
Replacing the status-light board
computer. After working inside your computer, follow the instructions in
Replacing the status-light board
18
After
www.dell.com/
35
Advertisement
Table of Contents
