NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
3. Remove the
wireless
card.
Procedure
1. Peel off the tape that secures the I/O-board cable to the I/O board.
2. Open the latch and disconnect the I/O-board cable from the I/O board.
3. Disconnect the coin-cell battery cable and the power and volume-buttons board cable from the I/O board.
Figure 28. Removing the I/O board
1. I/O-board cable
3. latch
Removing the I/O board
computer. After working inside your computer, follow the instructions in
2. tape
4. I/O board
After
www.dell.com/
Removing the I/O board
31
53