Table of Contents
Advertisement
Preparations before the initial use
Confirm if water inlet valve is open.
Confirm power is connected properly, concealed version side power leak switch is "ON" (detailed information
refers to page 11 on UG).
Confirm battery has been installed in the remote docking station properly.
Confirm no obstacle in front of product.
After toilet self-inspection completed, it is normal to hear motor rotating and water flow noise. When night light blink
indicates self-inspection is in process.
Default ex-work status for initial use：
Front Wash:
Water temp: mid
Water flow intensity: mid
Ejection position: mid
Pulsation mode: OFF
Rear Wash:
Water temp: mid
Water flow intensity: mid
Ejection position: mid
Pulsation mode: OFF
The above settings are for the full-functional version. For differences in the specifications of models, refer to their
product configuration matrix.
Kohler Co.
Fig 20
Seat temp: mid
Night light: ON
Auto energy saving: OFF
Auto cover open: ON
Microwave detection distance: mid
Auto flush function: ON
Auto UV function: ON
Auto deodorizer function: ON
Standby mode: OFF
Prolonged seating indication function: OFF
13
1383620-KR01-A
Advertisement
Table of Contents
