Battery - KYMCO X -Town 125 ABS Service Manual

17
. BATTERY/CHARGING SYSTEM

BATTERY

REMOVAL/INSTALLATION
The battery is in the battery box behind seat.
1. Remove the seat.
2. Remove 2 screws and then remove the
battery retainer
4. Pull battery out to expose the terminal
leads
5. Disconnect the negative (-) terminal lead (3)
from the battery first, then disconnect the
positive (+) terminal lead (4).
6. Remove the battery from the battery box.
Battery installation:
Install in the reverse order of the removal.
＊
When install the battery, first connect the
positive (+) cable and then negative (-)
cable to avoid short circuit.
X -Town 125 ABS/ CBS
(4)
(3)
17-4