9.FINAL REDUCTION
SERVICE INFORMATION
GENERAL INSTRUCTIONS
The servicing operations of this section can be made with the engine
installed.
When replacing the drive shaft, use a special tool to hold the bearing inner
race for this operation.
SPECIFICATIONS
Specified Oil: SAE 90#
Oil Capacity:
At disassembly : 0.13liter
At change
TORQUE VALUES
Transmission case cover bolt
SPECIAL TOOLS
Oil seal and bearing installer
Bearing puller A120E00037
TROUBLESHOOTING
Engine starts but motorcycle won't move
Damaged transmission
Seized or burnt transmission
Abnormal noise
Worn, seized or chipped gears
Worn bearing
Oil leaks
Oil level too high
Worn or damaged oil seal
: 0.12 liter
1.0~1.4kgf-m
A120E00014
X -Town 125 ABS/ CBS
9-2