Idle Speed - KYMCO X -Town 125 ABS Service Manual

3. INSPECTION/ADJUSTMENT
Adjust by loosening the valve adjusting screw
lock-nut and turning the adjusting screw
until there is a slight drag on the thickness
gauge .
Valve Clearance: IN: 0.10 mm
EX:0.10 mm
Apply oil to the valve adjusting screw locknut
threads and seating surface.
Hold the adjusting screw and tighten the lock
nut to the specified torque.
Torque: 0.9 kgf-m (9 N-m)
Special tool:
Valve adjuster A120E00036
After tightening the lock-nut, recheck the
valve clearance.
Install the removed parts in the reverse order
of removal.

IDLE SPEED

＊
● It is not necessary to adjust idle speed
F or X -TOWN125i. The throttle
body is factory preset originally, do not
loosen or tighten the painted bolts and
screws of throttle body. Loosening or
tightening them can cause throttle a idle
and valve with failure.
.
.
Idle Speed:
DINK 125: 1700 rpm
X-TOWN125i: 1800 rpm
When the engine misses or run erratic
3-13
X-Town125 ABS/CBS