Cylinder Head - KYMCO X -Town 125 ABS Service Manual

6. CYLINDER HEAD/VALVES

Cylinder head

Check the spark plug hole and valve areas for
cracks.
Check the cylinder head for warpage with a
straight edge and feeler gauge.
ASSEMBLY
Install the valve spring seats and oil seal.
＊
Be sure to install the new oil seals.
Lubricate each valve with engine oil and
insert the valves into the valve guides.
Install the valve springs and retainers.
Compress the valve springs using the valve
spring compressor, then install the valve
cotters.
＊
• When assembling, a valve spring
compressor must be used.
Special tool:
Valve Spring Compressor A120E00040
Tap the valve stems gently with a plastic
hammer for 2～3 times to firmly seat the
cotters.
＊
Be careful not to damage the valves.
Valve Spring Compressor
Plastic Hammer
Cylinder Head
X -Town 125 ABS/ CBS
6-12