Removing The Power Button With Fingerprint Reader; Prerequisites; Procedure - Dell Inspiron 3583 Service Manual

Identifier
Status
Removing the power button with fingerprint
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Applicable only for computers that are shipped with fingerprint reader.
Identifier
Status

Prerequisites

1 Remove the base cover.
2 Remove the battery.
3 Remove the solid-state drive/Intel
4 Remove the fan.
5 Remove the heat sink.
6 Remove the wireless card.
7 Remove the power-button
8 Remove the system board.
Identifier
Status

Procedure

1 Peel the fingerprint reader cable off the palm rest and keyboard assembly.
2 Remove the screw (M2x2) that secures the power button with fingerprint reader to the palm rest and keyboard assembly.
3 Using a plastic scribe, release the fingerprint-reader board from the palm rest and keyboard assembly.
4 Lift the power button with fingerprint reader, along with its cable, off the palm rest and keyboard assembly.
GUID-43423BFB-7BAA-4C7E-BA7A-12118E225EBA
Released
computer. After working inside your computer, follow the instructions in
GUID-EE40ADC6-C1BD-4F6F-A0FF-A3F1DEB59609
Released
Optane.
board.
GUID-BE6A1753-0468-48CC-89AE-B281FF18E0AF
Released
www.dell.com/

Removing the power button with fingerprint reader

38
reader
After working inside
79