Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Align the notch on the memory module with the tab on the memory-module slot.
2
Slide the memory module firmly into the slot at an angle.
3
Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Identifier
Status
Post-requisites
Replace the
base
cover.
GUID-1F5023F5-9868-4AAF-A9F5-BFB400CD890A
Released
Replacing the memory modules
computer. After working inside your computer, follow the instructions in
GUID-15DBE686-A4FF-4F35-B325-5883438D1137
Released
GUID-029EDBD3-3EED-4DA1-B2F8-A3A97D2E2804
Released
After working inside
www.dell.com/
Replacing the memory modules
11
27