Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
1
Remove the
base
cover.
2
Remove the fan.
Identifier
Status
Procedure
1
Remove the three screws (M2.5x5) that secure the left hinge to palm rest and keyboard assembly.
2
Open the left hinge.
3
Open the latch and disconnect the power-button board cable from the system board.
4
Peel off the tape that secures the power-button board to the palm rest and keyboard assembly.
GUID-A35BD2D5-B3B3-4708-AF1C-D61C58B9F952
Released
Removing the power-button board
computer. After working inside your computer, follow the instructions in
GUID-8F605C1C-7CD6-4EE8-93E7-C810E6793F7C
Released
GUID-4B7FF860-E101-4C78-86C3-860CD80E14E1
Released
After working inside
www.dell.com/
Removing the power-button board
34
69