Advertisement
Message
No. #n
Wing-Conning(Communi
cation failed, Main LAN)
No. #n
Wing-Conning(Communi
cation failed, Sub LAN)
Port Main
Propeller(invalid)
Port Main Propeller(not
plausible)
Port Main
Propeller(unavailable)
Position(doubtful)
Position(failed)
ROT(invalid)
ROT(unavailable)
Rudder #n(invalid)
Rudder #n(not plausible)
Rudder #n(unavailable)
Rudder(Communication
failed, Main LAN)
Rudder(Communication
failed, Sub LAN)
Appendix A Alert List
Explanation
Communication with No.
#n Wing-Conning cannot
be performed via Main
LAN.
Communication with No.
#n Wing-Conning cannot
be performed via Sub
LAN.
There is a format error or
a status error of the data.
There is a range error of
the data.
The data cannot be
received.
The integrity of Position
cannot be verified.
The Position has been
rejected by the integrity
verification.
There is a format error or
a status error of the ROT
data.
The ROT data cannot be
received.
There is a format error or
a status error of the
Rudder data.
There is a range error of
Rudder data.
The Rudder data cannot
be received.
Communication with
Rudder cannot be
performed via Main LAN.
Communication with
Rudder cannot be
performed via Sub LAN.
A-26
Advice
Check the condition of No. #n Wing-Conning
and Main LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Check the condition of No. #n Wing-Conning
and Sub LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Check the sensor condition.
Check the sensor condition.
Check the condition of the sensor and the
communication path.
Check the sensor condition. Switch to a
sensor in good condition.
Check the sensor condition. Switch to a
sensor in good condition.
Check the sensor condition.
Check the condition of the sensor and the
communication path.
Check the sensor condition.
Check the sensor condition.
Check the condition of the sensor and the
communication path.
Check the condition of Rudder and Main LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Check the condition of Rudder and Sub LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Advertisement
