Ariens ZT XL 42 Owner's/Operator's Manual page 29

PROBLEM
Engine overheats.
Unit moves with
engine off and
parking brake
engaged.
Hour meter
continues when
engine not
running.
Unit does not
travel in a straight
line.
Unit creeps with
steering levers in
neutral position.
Poor cutting
quality.
PROBABLE CAUSE
1. Engine oil level low.
2. Cooling system
plugged.
3. Faulty engine.
1. The parking brake
needs adjustment.
2. Faulty parking
brake.
1. Ignition key is in the
run position with
engine turned off.
1. Incorrect tire
pressure.
2. Steering levers need
adjustment.
3. Hydrostatic
transmission and/or
linkage needs
adjustment.
1. Hydrostatic
transmission and/or
linkage needs
adjustment.
1. Mower deck not
level or mower pitch
is incorrect.
2. Dull or faulty mower
blades.
1. Add engine oil. Refer to Engine
Manual for detailed instructions.
2. Clean cooling system. Refer to Engine
Manual for detailed instructions.
3. Contact your Gravely Dealer.
1. Contact your Gravely Dealer.
2. Contact your Gravely Dealer.
1. Turn ignition key to the off position.
1. Check tire pressure (see
Specifications on page 31) .
2. Adjust steering levers (see Forward
and Reverse Speed Adjustment on
page 24).
3. Contact your Gravely Dealer.
1. Contact your Gravely Dealer.
1. Level and adjust pitch of mower deck
(see The Distance From The Mower
Blades To The Ground on page 21).
2. Sharpen mower blades or replace
mower blades (see REPLACING
MOWER BLADE on page 20).
EN - 29
CORRECTION